AOM BRP Manual de uso y mantenimiento - Página 8

Navegue en línea o descargue pdf Manual de uso y mantenimiento para Pulverizador de pintura AOM BRP. AOM BRP 18 páginas.

Imprimir página
USE AND MAINTENANCE MANUAL

2.3 TECHNICAL FEATURES

The painting spray gun must be used with a compressor of 5 bar (71 psi) at least. Its design
improves the distribution of the air supplied from the internal holes also at very low working
pressures.
ASTURO ORIGINALI MAVES Spa carries out all the necessary tests on the painting spray
gun before delivering it to its customers.
NOZZLE TECHNICAL FEATURE TABLE
Surface
Matallic/water
NOZZLE
Nitre
primer
Basecoat
Clearcoat
base
ü
ü
ü
Ø1.0 - 1.2
ü
Ø1.4 - 1.5
Ø1.7 - 1.9
ü
Ø2.2 - 2.5
BODY SHOP
Air consumption
Nozzle size
Max. pressure
Working pressure
The above technical features are only exemplifying and can vary without prior notice.

2.4 STANDARD AND OPTIONAL COMPONENTS

The spray gun is delivered with the following standard components:
+ 1 - Dismantling wrench.
+ 1 - Cleaning brush.
+ 1 - Use and maintenance manual.
+ 1 - Declaration of conformity to CE RULINGS.
+ 1 - Warranty certificate.
On request:
+
Nozzles with different measures.
+
Connection hoses.
Stainless steel filter holder with FM 1/4" (or 3/8") filter.
+
+
M3/8" fluid in let fiting.
PRODUCT
Wood
Oil-based
Rust proof
Nitre Enamel
filler
Lacquer
paint
coat
ü
ü
ü
ü
ü
ü
WOODWORKING
FEATURE
200Lt/min (70 c.f.m.)
0,8-1,0-1,2-1,4-1,5-1,7-1,9-2,2-2,5
Fan width
320mm (12.5 in.)
Weight
375 gr (13.2 oz.)
Air inlet
Paint inlet
M 1/4" (or M3/8")
Hammered-
Orange-peel
Primer Sealer Enamel
effect paint
effect paint
ü
ü
ü
ü
ü
ü
METAL PAINTING
VALUE
5 Bar (71 PSI)
4 Bar (57 PSI)
M 1/4"
Page 8 of 13
®