Aopos T220III Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Impresora Aopos T220III. Aopos T220III 18 páginas. Thermal

3. Printer Interface and Connection

a. Before connecting/disconnecting the interface cable, make sure that power to the

printer and all the devices connected to the printer is turned on

b. Connect the interface cable to the connector on the rear panel of the printer

c. In the case of a serial interface, tighten the connector screws. In the case of a parallel

interface, fasten the connector clasps

Important:

Make sure that the printer is turned off and unplugged from the AC outlet and

that the computer is turned off before making connections.

Do not connect a telephone line into the peripheral drive connectors. Failure to

observe this may result in damage to the printer.

-8-

a. Connect the AC power cord to the inlet of AC adapter, and then connect the power

cord plug to a suitable electrical outlet

b. Connect the adapter cable to power connector of printer, make sure the printer

power switch is OFF before making any connections

c. Set the power switch as shown. The POWER lamp on the control panle will light

up.

-9-