Abus SHRM10000 Instrucciones de uso originales - Página 11

Navegue en línea o descargue pdf Instrucciones de uso originales para Alarma de humo Abus SHRM10000. Abus SHRM10000 16 páginas. Z-wave smoke detector

4.6.

Alarm state: Smoke

If smoke is detected, a loud, pulsing alarm tone sounds and the red LED flashes

at the same time at short intervals. In this case, proceed as described in the

"Behaviour in case of alarm" chapter.

4.7.

If the detector is in the alarm state, the acoustic alarm can

be deactivated for 10 minutes by pressing the Test button.

If the muting function is active, the red LED flashes every

10 seconds.

If smoke is still detected in the smoke measurement

chamber after the 10-minute muting period, the acoustic

alarm will sound again.

5.1.

Slide the base unit from the mounting plate

and remove the safety strip from the battery

compartment

Click the + (Add) button in your Z-Wave App

and follow the further instructions

English