Apollo RoadRunner Ser Manual Y Manual De Instrucciones - Página 4
Navegue en línea o descargue pdf Ser Manual Y Manual De Instrucciones para Sensores de seguridad Apollo RoadRunner. Apollo RoadRunner 19 páginas. Mobile digital video recording system
También para Apollo RoadRunner: Manual de instalación (17 páginas), Manual de usuario y manual de instrucciones (11 páginas), Manual de instalación (17 páginas)
Imprimir página
2.0
Installation
2.1
Installing the Hard Disk Player
1.
2.
3.
NOTE: You should always turn the Hard Disk Player OFF using the switch on the
back prior to removing the hard disk module.
Page 4
Connect the 12VDC power adapter cable to the back of the
Player and into the wall outlet
Connect the USB ports of the Player to the PC using the
provided USB cable.
Once you have recorded video on the DVR's removable
hard drive, you can view it on your computer using the Hard
Disk Player:
a.
Remove the hard disk drive from the DVR:
i. Turn the DVR key to the "OFF" position.
ii. Ensure the front panel LED lights are not
iii. Remove the hard disk drive.
b.
Connect the hard disk drive to the Player.
c.
Turn the Player ON by selecting the switch on the
Player. The power LED will illuminate indicating
the Player is powered on.
d.
The PC should recognize that a new USB device
has been installed and you can now use the
HDPlayer software to view video. (Refer to section
3.0).
Toll Free:
illuminated.
14148 NE 190th Street – Woodinville, WA 98072
888.288.8721;
Tel:
Apollo Video Technology
425.483.7100;
Fax:
www.avt-usa.com
425.483.7200