Apollo 7100 Manual de instalación - Página 8

Navegue en línea o descargue pdf Manual de instalación para Abrepuertas Apollo 7100. Apollo 7100 16 páginas. Residential & medium duty commercial slide gate operator

Imprimir página

1. Control Board Connections
2. Control Board Adjustments

Four 1/2" anchor bolts (not supplied) are

recommended to mount the chassis. The

holes should be drilled with a 1/2"

concrete drill bit.

STEP 1. Set the operator on the pad as shown. Align the sprockets 3 to 5 inches from the inside

surface of the gate.

STEP 2. Mark the four mounting holes on the pad.

STEP 3. Remove the operator and drill the holes according to the anchor bolt manufacturers in-

structions.

STEP 4. Replace the operator and fasten to the pad.

Chain path

(Make sure

the chain

path clears

all posts and

obstacles).

OPERATOR INSTALLATION

TOP VIEW

3"- 5"

Mounting

Holes (4)