Aponorm BASIS PLUS BLUETOOTH Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Tensiómetro Aponorm BASIS PLUS BLUETOOTH. Aponorm BASIS PLUS BLUETOOTH 19 páginas.

Imprimir página



Always remove the rechargeable batteries

if you do not intend to use the monitor for a

week or more.



The batteries can NOT be charged while inserted

in the blood pressure monitor. Recharge the

batteries in an external charger and observe

the information regarding charging, handling

and service life.

6. Using a mains adapter

You can operate this monitor using the Microlife

mains adapter (DC 6 V, 600 mA).



Only use the aponorm

available as an original accessory appropriate

for your supply voltage. You can purchase the

mains adapter from your local pharmacy.



Ensure that neither the mains adapter nor the

cable are damaged.

Plug the adapter cable into the mains adapter

socket

of the blood pressure monitor.

Plug the adapter plug into the wall socket.

When the mains adapter is connected, no battery

current is consumed. We recommend to have

batteries in the monitor even with mains operation,

just as a back-up. They ensure that in the event of

a power failure date and time are retained and do

not have to be entered manually again.

mains adapter

7. Error messages

When an error occurs during a measurement, the

measurement is interrupted and an error message

displayed, e.g. «Err 3».



If you do not receive an error message, but if

the results seem unusual to you, please check

whether you observed all points of the check

list on page 8 and in the enclosed flyer "8

golden rules of taking the blood pressure".



For more detailed help in troubleshooting the

monitor, please refer to the download section

of the www.aponorm.de product website.

Error

Designa-

tion

«ERR 1»

Signal too

-E

weak

Potential cause and

remedy

The pulse signals on

the cuff are too weak.

Re-position the cuff and

repeat the measure-

ment.*