ADE LW100-3 Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Scales ADE LW100-3. ADE LW100-3 20 páginas. Electronic, price-computing calibrated retail scales
Imprimir página
Backlight setting
Users can choose to enable or disable the backlighting of the scale display. Activating the
backlighting makes it easier to read the weighing results, but at the same time leads to
increased power consumption.
The scale offers three different backlight setting options:
oFF:
The backlight is switched off permanently.
on:
The backlight is switched on permanently.
AUto:
The backlight switches on automatically when the weighing surface is
loaded or after pressing a key, or off again after a short period without
weight movement or pressing a key.
To set the backlight, follow the instructions below:
In the weighing mode, press and hold the
The displays "Weight" and " Price" show bLSET MODE. The display "Total" shows the
selected option.
You can change the setting by pressing the direct PLU keys
Confirm your setting by pressing the
key.
When the scale is turned off, the last settings you made will remain stored.
Cleaning
Disconnect the mains plug before cleaning the scale. Use only a damp cloth or an ordinary
disinfectant for cleaning. Do not use aggressive liquid cleaning agents, abrasive or acidic
detergents or white spirit.
Make sure that no liquid cleaning agent or water penetrates the scale and always follow the
manufacturer's instructions for use.
Faults and error messages
Below you will find a list of possible errors and faults. If necessary, these can be eliminated
with simple means. If the fault or error cannot be eliminated or other error messages occur,
please contact your service partner.
12
9. Backlight and parameter settings
key for approximately 2 seconds.
key or cancel the procedure by pressing the
10. Care and maintenance
or
.
LW100-210408-Rev002-UM-en