ADE LW300-6T Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Scales ADE LW300-6T. ADE LW300-6T 20 páginas. Electronic, price-computing retail scales

Battery status indicator

Display indication

Low battery indicator (only in battery mode). The indication of the function

is shown by an arrow (▼) in the display.

In order to protect the scale, it switches off automatically 30 minutes after

the battery symbol lights up if the charging voltage is too low. The battery

must be fully charged before operating the scale again.

Caution: The indicator symbol on the display shows the battery charge level when the scale is

not connected to the mains. When connecting the scale to the power supply, note the

LED display.

LED display

Green

Mains operation.

Battery is charging. To ensure that the battery is fully charged, keep the

scale connected to AC power for at least one hour.

Yellow

Battery is charging.

red

Battery almost discharged. Please charge immediately. Charging can take

up to twelve hours.

Caution: Please charge the battery fully before using it for the first time.

Do not load the scale with weights that exceed the maximum capacity. As soon as you perceive

the signal for an overload - this is shown by "--oL--" on the display - immediately remove the

load from the scale so as not to irreparably damage the load cell.

Switching on the scale

Remove all weights from the weighing surface.

To turn on the scale, press the on/off switch (on the right side below the housing).

The scale performs a test program. All symbols and characters are briefly displayed. End of

routine is confirmed with an acoustic signal and "0.00 / 0.000" is shown on all three displays.

The scale is now ready for use.

Upon relocation and especially in case of temperature changes, wait for a warm-up phase of 15

minutes after switching on the instrument to stabilize the measurement results.

Switching off the scale

To turn off the scale, press the on/off switch (on the right side below the housing).

Automatic deactivation of the scale

The scale is equipped with a power saving function. As a result, the scale switches off after a

period of time that can be set by the user (see section 9).

LW300_LW300T-200520-Rev005-UM-en