Austlift 915230 Instrucciones de uso - Página 3
Navegue en línea o descargue pdf Instrucciones de uso para Sistemas de elevación Austlift 915230. Austlift 915230 12 páginas. Retractable fall arrester
Imprimir páginaPERFORMANCE AND LIMITATIONS OF USE
The equipment has been tested in accordance with EN 360:2002 & as per VG11 RFU # 11.060
and has achieved the following performance levels:
EN 360:2002 test
Clause 4.1
Design & Ergonomics
Clause 4.2
Materials & Construction
Clause 4.3
Locking after Conditioning(EN 364:1993)
Clause 4.4
Static Strength(EN 364:1993)
Clause 4.5
Dynamic Performance(EN 364:1993)
Clause 4.7
Corrosion Resistance (EN 364:1993)
AS PER VG11 RFU # 11.060
1. Dynamic Performance:
a. Perpendicular to the edge
b. Lateral offset of 1.5 mtr
2. Dynamic Strength
a. Perpendicular to the edge
b. Lateral offset of 1.5 mtr
3. Static Strength after each Dynamic
Strength test
Result/Comment
Achieves required performance as stated in EN
360:2002 (PASS).
Lanyard free from sharp or excessively abrasive
surface (PASS).
No unnecessary features which add significantly to
overall mass ( Pass).
Lanyard end terminated with a loop, for connection
to harness and fall arrest system (PASS).
Lanyard meets static strength requirement (PASS).
After conditioning, it locks & remains locked until
released with 5 kg Max. (PASS)
12kN sustained for 3 minutes without release
(Wire) (PASS). 15kN sustained for 3 minutes
without release (Webbing) (PASS).
When tested with the test mass of 100 kg,
The Arrest force <6.00 kN, Arrest distance <2.00 m
(PASS).
Corrosion test in accordance with ISO 9227:1990-
24 hours (PASS).
Result/Comment
100 Kg mass held
Breaking force <6kN
Breaking distance less than 2 mtr
100 Kg mass held
f=3kN (Cable) 4.5 kN (Textile) 3 mints
915207
3