Austroflamm SmartSpot Instrucciones de uso - Página 9

Navegue en línea o descargue pdf Instrucciones de uso para Controlador de temperatura Austroflamm SmartSpot. Austroflamm SmartSpot 14 páginas. Room temperature sensor
También para Austroflamm SmartSpot: Instrucciones de uso (20 páginas)

Imprimir página
Austroflamm SmartSpot Instrucciones de uso
SmartSpot
EN

5 | Installing the SmartSpot receiver

5
Installing the SmartSpot receiver
NOTICE
Have the installation carried out by a professional.
When the SmartSpot receiver is being connected to the controls, the stove must be disconnected from
the mains!
The controls are situated behind one of the cladding panels of the stove. Which panel depends upon
the stove model. The corresponding side cladding must be removed beforehand.
The wired room sensor installed as standard on the "T01" connection of the control board must be ter-
minated. (Disconnect the QUICK RELEASE PLUG or remove 2 x black wires from the cable connector)
Then connect the SmartSpot receiver to the controls as follows.
9