5BARz MD015A-800 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Extensor 5BARz MD015A-800. 5BARz MD015A-800 7 páginas.

Imprimir página



There must be a signal in the area for 5BARz to boost. Areas where there is no signal

can not be helped with the 5BARz product.



The 5BARz Road Warrior includes a USB connect port on the side of the phone cradle

enabling you to power your phone while using the 5BARz. This cable comes standard

with most phones. Simply connect the cable to the phone cradle and your phone.

Contact your phone manufacturer if you need this cable.



For increased coverage area/range and more convenient product usage consider

purchasing an additional antenna. See



The LED light on the front of the unit changes colors to give you operation status

LED Color

Blinking blue

Solid blue

Solid yellow

Blinking red

Solid red

www.cellynx.com/products

Description

When unit is turned on it blinks

blue while self-configuring

Unit is ready and operating

This is a temperature warning

These are unit-protection

signals indicating one of the

following situations



the phone cradle and

5BARz unit are too close

together



5BARz unit is too close

to a cellular base station



5BARz is overheated

Possible internal failure

for more details.

Action

None

Turn off the unit and restart

in 10 minutes

Further separate the phone

cradle from the 5BARz unit

As you drive past the station

the blue light will reappear

Turn off the unit and restart

in 10 minutes

Turn the unit off and restart

in 10 minutes. If you get a

solid red signal again contact

support at