Gaggenau AH 592-120 Instrucciones de uso y montaje originales - Página 10
Navegue en línea o descargue pdf Instrucciones de uso y montaje originales para Campana de ventilación Gaggenau AH 592-120. Gaggenau AH 592-120 18 páginas. Freely suspended insular hood
También para Gaggenau AH 592-120: Manual de instrucciones de funcionamiento y montaje (18 páginas)
Imprimir página
4. Cleaning and care
Fig. 13
Fig. 14
Cleaning the grease filters
The grease filter saturation display F flashes after
an operating time of 30 hours to indicate that you
should clean the grease filters (see Fig. 3). The
grease filters can of course be cleaned at any time,
even if the grease filter saturation display has not
started to flash.
The stainless steel grease filters can be removed
easily for cleaning (see Fig. 13):
Disconnect the power supply (switch off the fuse).
Grip the grease filter handle and push the slide
towards the rear. Then pull the grease filter down-
wards out of the holder; repeat the operation for the
other grease filters.
You can clean the stainless steel grease filters in a
dishwasher at a maximum temperature of 65°C,
where it should be supported vertically to allow
food or rinsing residues to drain off.
If possible, the inner parts of the housing should be
wiped out in hot rinsing water when replacing the
filters.
Caution:
when cleaning the inside of the housing, beware of
protruding parts.
After having cleaned them, re-insert the grease
filters in the extractor hood in reverse order.
Note:
the handles of the grease filters must be visible
after assembly.
Press the F key to set the elapsed hours counter to
zero. Flashing of the indicating lamp goes off.
9