ADEMCO 20SE Formulario de programación - Página 3
Navegue en línea o descargue pdf Formulario de programación para Sistema de seguridad ADEMCO 20SE. ADEMCO 20SE 8 páginas. 2-partitioned security system
Imprimir página
* 36
ENTRY DELAY 2 (zone type 02)
* 37
AUDIBLE EXIT WARNING
* 38
CONFIRMATION OF ARMING DING
* 39
POWER UP IN PREVIOUS STATE
DIALER PROGRAMMING (*40–*53)
In fields * 40, * 41, * 42, enter up to the number of digits shown. Do not fill unused spaces. Enter 0–9; #+11 for '*';
#+12 for '#'; #+13 for a pause.
* 40
PABX ACCESS CODE
* 41
PRIMARY PHONE No.
* 42
SECONDARY PHONE No.
* 43
PRIMARY SUBS ACCT # (Part. 1)
* 44
SECONDARY SUBS ACCT # (Part. 1)
* 45
PRIMARY SUBS ACCT # (Part. 2)
* 46
SECONDARY SUBS ACCT # (Part. 2)
NOTE: If using the paging feature, do not enter a
leading 0 in the subscriber account number, and do
not use digits A-F anywhere in the number. Some
paging systems provide voice mail capability, which
is activated by a leading 0 in the message.
* 47
PHONE SYSTEM SELECT
* 48
REPORT FORMAT
† Entry of a number other than one specified will give unpredictable results.
Part. 1 † Part. 2 †
partition; 50 seconds max. for UL installations
Part. 1 † Part. 2 †
Part. 1 † Part. 2 †
0 = no; 1 = yes (wired keypads and RF); 2 = yes, RF only
0 = no; 1 = yes; "1" for UL installations
Enter 6 digits. If fewer than 6 digits are entered, exit by
pressing * (and press 41, if entering next field). To clear entries
from field, press * 40 * .
Enter up to 16 digits; Do not fill unused spaces. If fewer than 16
digits entered, exit by pressing * (and press 42, if entering next
field). To clear entries from field, press * 41 * .
Enter up to 16 digits; Do not fill unused spaces. If fewer than 16
digits entered, exit by pressing * (and press 43, if entering next
field). To clear entries from field, press * 42 * .
If Cent. Sta. IS NOT on a WATS line: 0 = Pulse Dial; 1 = Tone
Dial; if Cent. Sta. IS on a WATS line: 2 = Pulse Dial ; 3 = Tone
Dial.
Primary
0 = 3+1, 4+1 ADEMCO L/S STANDARD
1 = 3+1, 4+1 RADIONICS STANDARD
2 = 4+2 ADEMCO L/S STANDARD
3 = 4+2 RADIONICS STANDARD
|
|
[60] [60]
00-99 = entry delay 2 time for each
[1] [1]
0 = no; 1 = yes
[0] [0]
† [1]
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For fields *43 - *46:
|
|
|
Enter 0–9; #+11 for B; #+12 for C; #+13
for D; #+14 for E; [#+15 for F]. Enter * as
|
|
|
4th digit, if 3+1 dialer reporting is to be
used. If only 3 digits used, exit by pressing
|
|
|
* (and press next field).
To clear entries from field, press * 43 *
|
|
|
, * 44 * , * 45 * , or * 46 * .Examples:
For Acct. 1234, enter:
For Acct. B234, enter:
For Acct. 123, enter:
† [1]
[7] [0]
Secondary
6 or undefined = 4+2 ADEMCO EXPRESS
7 = ADEMCO CONTACT ID REPORTING
8 = 3+1, 4+1 ADEMCO L/S EXPANDED
9 = 3+1, 4+1 RADIONICS EXPANDED
– 3 –
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4
#+11| 2 | 3 | 4
1 | 2 | 3 | *
|
|
|
|