ADEMCO Ademco VISTA-20P Manual de programación - Página 13

Navegue en línea o descargue pdf Manual de programación para Sistema de seguridad ADEMCO Ademco VISTA-20P. ADEMCO Ademco VISTA-20P 17 páginas. Programming auto arming and disarming schedules
También para ADEMCO Ademco VISTA-20P: Manual de instalación rápida (2 páginas), Manual de programación (17 páginas), Manual del usuario (20 páginas), Manual de inicio rápido (6 páginas), Manual de instalación rápida (2 páginas), Manual de instalación rápida (2 páginas), Manual de programación (2 páginas), Manual rápido (2 páginas)

Imprimir página

ADEMCO Ademco VISTA-20P Manual de programación

Type 21

Arm-Away

Type 22

Disarm

Type 23*

No Alarm Response

Type 24

Silent Burglary

Type 77

Keyswitch

Types 90-93

Installer Defined

*The system can still be armed when these zone types are in a faulted condition.

Schedules

(installer code + [#] + [6] [4]; master code can only access schedules 01-16 for VISTA-20P, 01-04 for VISTA-15P, and

events 00-07 for both controls; VISTA-15P supports up to 8 schedules, VISTA-20P supports up to 32 schedules )

No.

Event

Device No.

(see list below)

for "01" events:

enter 01-18

Events:

Master/Installer

01 = device on/off

02 = user access

03 = latch key report

04 = forced STAY arm

• Arms the system in Away mode when the zone is activated.

• Pushbutton units send the user number to the central station when arming or disarming.

• User code for button must be assigned.

• Disarms the system when the zone is activated.

• User code for button must be assigned.

• Can be used on a zone when an output relay action is desired, but with no accompanying alarm (e.g.,

lobby door access).

• Usually assigned to all sensors or contacts on exterior doors and windows where bells and/or sirens are

NOT desired.

• Provides an instant alarm, with NO audible indication at any keypad or external sounder, if the zone is

faulted when the system is armed in the Away, Stay, or Instant, modes.

• A report is sent to the central station.

• Assign to zone wired to a keyswitch.

• These zone types can be programmed for various custom responses. See data fields *182-*185.

UL: Zone types 90-93 may not be used as fire or burglar zones in fire or UL burglar alarm installations.

Group No.

Partition

for "02" events:

for "04-06" events:

enter 1-8

enter 1, 2, or 3

05 = forced AWAY arm

06 = auto disarm

07 = display "reminder"

Start Time/

Days

Installer Only

10 = display custom words 8-10

11 = peridoic test report

– 13 –

Stop Time/

Repeat

Days

(yes/no)

Random

(yes/no)