ADEMCO Ademco VISTA-20P Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Sistema de seguridad ADEMCO Ademco VISTA-20P. ADEMCO Ademco VISTA-20P 6 páginas. Programming auto arming and disarming schedules
También para ADEMCO Ademco VISTA-20P: Manual de instalación rápida (2 páginas), Manual de programación (17 páginas), Manual del usuario (20 páginas), Manual de programación (17 páginas), Manual de instalación rápida (2 páginas), Manual de instalación rápida (2 páginas), Manual de programación (2 páginas), Manual rápido (2 páginas)

Step 5: Exit Delay (*34) (Page 4-2 in the Installation and Setup Guide)

The minimum delay is 45 seconds. If the delay is between 45 and 96 seconds,

then enter the actual seconds. If the delay time is more than 96 seconds, then

enter 97 and then the system will give you a delay of 120 seconds.

 Enter *34

 Then enter the exit delay time for Partition 1

 Then repeat the exit delay for Partition 2

o Note: Both partitions must have a delay time programmed, even if

you do not have a 2

After both delay times have been entered the system will automatically take

you to step 6.

Step 6: Entry Delay (*35) (Page 4-2 in the Installation and Setup Guide)

As with the exit delay, you must enter an entry delay for both partition 1 and 2

even if only 1 partition will be used.

30 to 90 seconds = enter the desired seconds 30-90

 Note: You will not need to enter *35 if you have just completed step 5.

 Enter the entry delay time for Entry Delay 1 on Partition 1

 Then enter the entry delay time for Entry Delay 1 on Partition 2

 Then enter the entry delay time for Entry Delay 2 on Partition 1

 Then enter the entry delay time for Entry Delay 2 on Partition 2.

The system will advance you to the next step when all delay times are

entered.

Step 7: Audible Exit Warning (*37) (Page 4-2 in the Installation and Setup

Guide)

 Note: You will not need to enter *37 if you have just completed step 6.

 If you want the system to rapidly beep 10 seconds before it arms, enter

01.

 Enter 00 if you do not want your system to beep.

The system will automatically advance you to the next step.

partition.

97 = 120 seconds

98 = 180 seconds

99 = 240 seconds