GREAT PLANES J-3 ElectriCub Manual de instrucciones - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para Juguete GREAT PLANES J-3 ElectriCub. GREAT PLANES J-3 ElectriCub 20 páginas. Electric sport-scale arf
Imprimir página
Attention: The product you have purchased is powered by
a rechargeable battery. At the end of its useful life, under
various state and local laws, it may be illegal to dispose of
this battery into the municipal waste system. Check with
your local solid waste officials for details in your area for
recycling options or proper disposal.
This product contains a chemical known to the state of
California to cause cancer and birth defects or other
reproductive harm.
1. Even though the Mini Cub ARF is small, lightweight and
flies slowly, if it is not assembled and operated correctly, it
could possibly cause injury to yourself or spectators and
property damage.
2. You must assemble the model according to the
instructions. Do not alter or modify the model, as doing so
may result in an unsafe or unflyable model.
3. You must take time to build straight, true and strong.
4. You must use an R/C radio system that is in first-class
condition; a correctly sized motor and components (servos,
battery, etc...) throughout the building process; and a micro
speed control capable of handling 5 Amps.
5. You must correctly install all R/C and other components
so that the model operates correctly on the ground and in
the air.
6. You must check the operation of the model before every
flight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.
7. If you are not an experienced pilot or have not flown this
type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for your
first flights. If you're not a member of a club, your local
hobby shop has information about clubs in your area whose
membership includes experienced pilots.
Note: We, as the kit manufacturer, provide you with a top
quality, thoroughly tested kit and instructions, but
ultimately the quality and flyability of your finished model
depends on how you build it; therefore, we cannot in any
way guarantee the performance of your completed
model, and no representations are expressed or implied
as to the performance or safety of your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.
DECISIONS YOU MUST MAKE
This is a partial list of items required to finish the Great
Planes Mini Cub ARF that may require planning or decision
making before starting to build. Order numbers are provided
in parentheses.
Radio Equipment
The Mini Cub ARF requires a micro receiver and two Nano
servos. Futaba
®
S3107 (FUTM0037) or Hobbico
(HCAM0090) micro servos are suitable. A 3-channel radio
is also required. The Great Planes C-5 (GPMM2000) hi-
frequency speed control is required.
Battery Selection
There are mainly two kinds of battery packs used for
electric R/C models; nickel-metal hydride (NiMH) packs and
nickel-cadmium (NiCd, pronounced ny-cad) packs. NiMH
batteries are recommended for the Mini Cub ARF because
they provide nearly twice the capacity of a NiCd for their
size. However, it should be noted that nickel-metal hydrides
cannot be charged as fast as NiCds.
Each individual cell that makes up a battery is 1.2 volts.
Simply stated, a volt is the amount of power a battery pack
can deliver (a 6-cell battery pack is 7.2 volts). Batteries are
also rated by their capacity in mAh (milli-Amp-hours), or how
much energy they store. A 550 mAh battery can supply 1
Ampere for .55 hours (about 30 minutes). A 1200 mAh battery
pack is about twice the size of a 550 mAh battery pack.
The battery pack recommended for the Mini Cub ARF:
•
GPMP0072 8-cell 9.6V 2/3AA 650 NiMH
3
®
CS-5