AFG 3.0AR Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Bicicleta estática AFG 3.0AR. AFG 3.0AR 17 páginas. Recumbent
AS SE MB LY ST EP
BOLTS (E)
3.0AR SHOWN
A.
Open hardware bag for step 4.
B.
Slide top Cap groMMet and top Cap onto the bottom of the ConsoLe Mast.
C.
Carefully pull the ConsoLe wIre through the ConsoLe Mast using the twist tie located inside the
ConsoLe Mast.
D.
Attach the ConsoLe Mast to the MaIn fraMe using 8 boLts (e).
E.
Slide top Cap groMMet and top Cap down ConsoLe Mast and carefully snap top Cap into the
MaIn fraMe.
HARDWARE BAG FOR STEP CONTENTS :
10
2.0_3.0_AR_Rev.2.3.indd 10-11
CONSOLE MAST
TOP CAP GROMMET
TOP CAP
MAIN FRAME
BOLT (E)
10 mm
Qty: 8
ASSEMBLY STEP
CONSOLE
CONSOLE
CONSOLE WIRES
CONSOLE WIRES
CONSOLE MAST WIRES
CONSOLE MAST WIRES
PRE-ATTACHED SCREWS
note: there is no hardware bag for this step. all hardware is pre-attached.
A.
Attach the ConsoLe Mast wIres to the ConsoLe wIres.
B.
Carefully tuck the ConsoLe Mast wIres into the ConsoLe Mast before attaching ConsoLe.
C.
Attach the ConsoLe to the ConsoLe Mast using the 4 pre-attaChed sCrews (screws will have to be
removed from the console first).
note: be Careful not to pinch wires!
CONSOLE
CONSOLE
PRE-ATTACHED SCREWS
11
8/1/07 11:42:02 AM