AutomationDirect IronHorse GSDA-DP-S Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Media Converter AutomationDirect IronHorse GSDA-DP-S. AutomationDirect IronHorse GSDA-DP-S 16 páginas. Signal conditioner/generator

Imprimir página
1) JP1 - If the GSDA-DP-S is receiving a signal to be Scaled or Converted, this setting defines the
input signal type (0-10 VDC or 4-20 mA Current).
2) JP3 and JP4 - Determine the Output Signal type - Vdc or Current (4-20 mA). Both JP3 and JP4
MUST be set the same.
The four jumper settings allow the GSDA-DP-S to operate as:
1) 4-20 mA Input/Scaled 4-20 mA or 0.1-20VDC Output
2) 0-10 VDC Input/Scaled 4-20 mA or 0.1-20VDC Output
3) No Input/Generator 4-20 mA or 0.1-20VDC Output
NOTE: Both JP3 and JP4 must be set the same.
Input
Current
Current
Voltage
Voltage
Generate
Generate
Page 10
GSDA-DP-S Current/Voltage I/O Jumpers and Parameter 10 Settings
Output
Parameter 10
Scale/
Generate
Voltage
Scale
Current
Scale
Voltage
Scale
Current
Scale
Voltage
Gen
Current
Gen
Scale = 2
Gen = 1
IronHorse GSDA-DP-S User Manual – 1st Edition – 09/18/2019
JP1
JP3
V/I In
V/I Out
Reference
Pin to Pin Jumper Configuration
li
Vo
li
Io
Vi
Vo
Vi
Io
N/A
Vo
N/A
Io
JP4
JP5
V/I Out Power
Application
Supply
Configuration
Vo
Io
Vo
Io
Vo
Io
Allow Change = P/
EN position
Inhibit Change =
'COM' position