Autometers Systems A-400MB Folleto de programación e instalación - Página 7

Navegue en línea o descargue pdf Folleto de programación e instalación para Instrumentos de medida Autometers Systems A-400MB. Autometers Systems A-400MB 17 páginas. Mid approved sgs.uk appendix b and d, measures kwh, kvarh, kvar,pf,hz, max demand, rs 485 modbus autometers v6 protocol, two pulse outputs, bi- directional measurement for import and export, back light lcd for full viewing angles, available as 1 phase 2 w

Imprimir página

4. Set Up

To enter set-up mode, press the

Setting up is password-protected so you must enter the correct password

(default '1000') before processing.

If an incorrect password is entered, the display will show:

PASS Err

To exit set-up mode, press the

4.1 Set-up Entry Methods

Some menu items, such as password and CT, require a four-digit number entry while

others, such as supply system, require selection from a number of menu options.

4.1.1 Menu Option Selection

MD/

Use the

and

PF/HZ

Press

to conﬁrm your selection.

If an item ﬂashes, then it can be adjusted by the

Having selected an option from the current layer, press

SET indicator will appear.

Having completed a parameter setting, press

SET indicator will be removed and you will be able to use the

further menu selection.

On completion of all setting-up, press

restored.

4.1.2 Number Entry Procedure

When Setting up the unit, some screens require the entering of a number. In particular,

on entry to the setting up section, a password must be entered. Digits are set individually,

from left to right. The procedure is as follows:

The current digit to be set ﬂashes and is set using the

Press

to conﬁrm each digit setting. The SET indicator appears after the last digit has

been set.

After setting the last digit, press

will be removed.

button for 3 seconds until the password screen appears.

V/A

button repeatedly until the measurement screen is restored.

ESC

buttons to scroll through the diﬀerent options of the set-up menu.

V/A

ESC

V/A

to exit the number setting routine. The SET indicator

ESC

www.autometers.co.uk

MD/

and

PF/HZ

to conﬁrm your selection. The

V/A

to return to a higher menu level. The

ESC

MD/

PF/HZ

repeatedly until the measurement screen is

MD/

and

PF/HZ

buttons.

and

buttons for

buttons.