Autometers Systems A-400P Folleto de programación e instalación - Página 11
Navegue en línea o descargue pdf Folleto de programación e instalación para Instrumentos de medida Autometers Systems A-400P. Autometers Systems A-400P 17 páginas. Mid approved sgs.uk appendix b and d, measures kwh, kvarh, kvar,pf,hz, max demand, rs 485 modbus autometers v6 protocol, two pulse outputs, bi- directional measurement for import and export, back light lcd for full viewing angles, available as 1 phase 2 w
Imprimir página4.7.3 Baud Rate
From the set-up menu, use
Rate option.
Press
Use
38.4k
On completion of the entry procedure, press
and press
4.7.4 Parity
From the set-up menu, use
option.
Press
Use
(default)).
On completion of the entry procedure, press
and press
4.7.5 Stop Bits
From the set-up menu, use
option.
Press
Use
Note: Default is 1, and only when the parity is NONE that the stop bit can
be changed to 2.
On completion of the entry procedure, press
and press
4.8 Maximum demand reset
The meter provides a function to reset the maximum demand value of current and power.
Use
Press
Press
E
to enter the selection routine. The current setting will flash.
MD/
and
buttons to choose Baud rate 2.4k. 4.8k, 9.6k, 19.2k,
P
PF/HZ
V/A
to return to the main set up menu.
ESC
E
to enter the selection routine. The current setting will flash.
MD/
and
P
buttons o choose parity (EVEN / ODD / NONE
PF/HZ
V/A
to return to the main set up menu.
ESC
E
to enter the selection routine. The current setting will flash.
MD/
and
buttons to choose stop bit (1or 2)
P
PF/HZ
V/A
to return to the main set up menu.
ESC
MD/
and
buttons to select the reset option.
P
PF/HZ
E
to enter the selection routine. The dIt will flash
E
to confirm the setting and press
www.autometers.co.uk
MD/
and
P
buttons to select the Baud
PF/HZ
E
MD/
and
P
buttons to select the Parity
PF/HZ
E
MD/
P
and
buttons to select the stop bit
PF/HZ
E
V/A
to return to the main set up menu.
ESC
to confirm the setting
to confirm the setting
to confirm the setting
10