Autonics BF4R Manual

Navegue en línea o descargue pdf Manual para Accesorios Autonics BF4R. Autonics BF4R 8 páginas. Button adjustment fiber optic amplifiers
También para Autonics BF4R: Manual de instrucciones (8 páginas), Manual (11 páginas), Manual (7 páginas), Manual del producto (5 páginas)

Imprimir página
Autonics BF4R Manual
BF4 Series
High Reliability Of Fiber Optic Amplifier For Convenient Mounting
Features
● High speed response: max. 0.5ms
● Auto sensitivity setting (button setting)/external input sensitivity setting type
● External synchronization input, mutual interference protection, self-diagnosis
● Reverse power polarity and short-circuit (overcurrent) protection circuit
● Timer function: selectable none / 40ms OFF delay timer (fixed)
(standard type, remote sensitivity setting type only)
● Automatically selectable Light ON / Dark ON
● Precise detection of small target and easy to install in the complicated place
Please read "Safety Considerations" in operation
manual before using.
Ordering Information
BF 4 R P
Specifications
Model
Light source
Power supply
Current consumption
Operation mode
Control output
Protection circuit
Response time
Sensitivity setting
Indicator
Mutual interference prevention
Self-diagnosis output
Input of stop transmission function -
External synchronization function -
Remote sensitivity setting function -
Timer function
Insulation resistance
Noise immunity
Dielectric strength
Vibration
Shock
Ambient illumination
Environ-
Ambient temperature
ment
Ambient humidity
Material
Cable
Accessory
Approval
※ 1
Weight
※ 1: The weight includes packaging. The weight in parenthesis is for unit only.
※ The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
-
E
Standard type
BF4RP
BF4GP
BF4R
Red LED
Green LED
Red LED
(660nm)
(525nm)
(660nm)
12-24VDCᜡ ±10% (ripple P-P: max.10%)
Max. 45mA
Light ON/Dark ON switching
NPN or PNP open collector output
● Load voltage: max. 30VDCᜡ ● Load current: max. 100mA
● Residual voltage - NPN: max. 1V (load current: 100mA), max. 0.4V (load current: 16mA) / PNP: max. 2.5V
Reverse polarity protection circuit, short-circuit (overcurrent) protection circuit
Max. 0.5ms (frequency 1), max. 0.7ms (frequency 2)
Sensitivity setting button (ON/OFF)
Control output indicator (OUT): red LED,
Stability indicator (STAB): green LED (turns ON at stable light ON/OFF level)
Built-in differential frequency mode (frequency 1 (normal mode): max. 0.5ms, frequency 2: max. 0.7ms)
ON state under unstable sensing (when the target stays for 300ms in unstable level),
ON state when control output is short-circuited
● Load voltage: max. 30VDCᜡ ● Load current: max. 50mA
● Residual voltage - NPN: max. 1V (load current: 50mA), max. 0.4V (load current: 16mA) / PNP: max. 2.5V
OFF delay (40ms)
Over 20MΩ (at 500VDC megger)
±240V the square wave noise (pulse width: 1㎲) by the noise simulator
1,000VAC 50/60Hz for 1 minute
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Sunlight: max. 11000㏓, Incandescent lamp: max. 3000㏓ (received illumination)
-10 to 50℃, storage: -20 to 70℃
35 to 85% RH, storage:35 to 85% RH
Case: heat-resistance acrylonitrile butadiene styrene, cover: polycarbonate
Ø4mm, 4-wire, 2m
(AWG22, core diameter: 0.08mm, number of cores:
60, insulator out diameter: Ø1.25mm)
Mounting bracket, bolts, nuts
Approx. 120g (approx. 65g)
Fiber Optic Amplifier
No mark
Standard type
E
External synchronization input type
R
External input sensitivity setting type
No mark
NPN open collector output
P
PNP open collector output
R
Red LED
G
Green LED
4
Series
BF
Fiber Sensor
External synchronization
input type
BF4G
BF4R-E
BF4G-E
Green LED
Red LED
Green LED
(525nm)
(660nm)
(525nm)
Built-in
Built-in (gate/trigger)
-
-
Ø4mm, 6-wire, 2m
(AWG24, core diameter: 0.08mm, number of cores:
40, insulator out diameter: Ø1mm)
(A)
Photoelectric
Sensors
(B)
Fiber
Optic
Sensors
(C)
Door/Area
Sensors
(D)
Proximity
Sensors
(E)
Pressure
Sensors
(F)
Rotary
Encoders
(G)
Connectors/
Connector Cables/
Sensor Distribution
Boxes/ Sockets
(H)
Temperature
Controllers
(I)
SSRs / Power
Controllers
External input sensitivity
(J)
Counters
setting type
BF4R-R
BF4G-R
Red LED
Green LED
(K)
(660nm)
(525nm)
Timers
(L)
Panel
Meters
(M)
Tacho /
Speed / Pulse
Meters
(N)
Display
Units
(O)
Sensor
Controllers
(P)
Switching
Mode Power
Supplies
-
(Q)
-
Stepper Motors
& Drivers
Built-in
& Controllers
OFF delay (40ms)
(R)
Graphic/
Logic
Panels
(S)
Field
Network
Devices
(T)
Software
B-33