DBI SALA Flexiguard 8530579 Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial DBI SALA Flexiguard 8530579. DBI SALA Flexiguard 8530579 16 páginas. Safrig fall arrest system

LabeLs
The following labels must be present on the Flexiguard SafRig Fall Arrest System. Labels must be replaced if they are not fully
legible. Contact Capital Safety for replacement labels.
All Models
SAFRIG FALL PROTECTION SYSTEM
OPERATORS INSTRUCTIONS
WARNING
• ALL USERS MUST READ AND UNDERSTAND THE INSTRUCTIONS PRIOR TO USING
THIS SYSTEM.
• RETRACTABLE DEVICES AND SHOCK ABSORBERS USED WITH THIS PRODUCT MUST
HAVE AN AVERAGE ARRESTING FORCE OF NOT GREATER THAN 900 LB (4 KN) AND
MEET ANSI Z359.14 TYPE B OR Z359.13 RESPECTIVELY.
• DO NOT EXCEED THE MAXIMUM NUMBER OF USERS RATING.
• NO MORE THAN ONE PERSON IS ALLOWED TO BE ATTACHED TO A GLIDE RAIL
TROLLEY OR ANCHOR POINT AT ANY GIVEN TIME.
• DO NOT EXCEED THE RECOMENDED SAFE WORKING ANGLE OF 30˚AS SHOWN IN
FIGURE 1. FAILURE TO WORK WITHIN THE SAFE WORKING AREA MAY CAUSE
SERIOUS INJURY OR DEATH.
• BE CAUTIOUS OF OVERHEAD POWER LINES OR OTHER ELECTRIC SOURCES WHICH
CAN CAUSE ELECTRIC SHOCK.
• IF YOU HAVE ANY QUESTIONS OR CONCERNS ON THE USAGE, CARE, OR
SUITABILITY OF THIS EQUIPMENT, PLEASE CONTACT CAPITAL SAFETY BEFORE
USING IT.
• SUPPORTING STRUCTURES FOR THIS SYSTEM MUST BE CERTIFIED AND CAPABLE
OF SUPPORTING THE ENTIRE WEIGHT OF THE CONFIGURED SYSTEM ALONG WITH
ANY LOADS THAT COULD POTENTIALLY BE INTRODUCED IN THE EVENT OF
ARRESTING A FALL.
• ONLY USE THIS SYSTEM ON LEVEL GROUND.
FIGURE 1
8530579
30° MAX
SAFE
WORKING
ANGLE
17'-7" MAX
WORKING
RADIUS
8530595
30° MAX
SAFE
WORKING
ANGLE
15'-4" MAX
WORKING
RADIUS
WEIGHTS
INDIVIDUAL COMPONENTS:
DAVIT - 550 lbs. [249 kg]
C/W BASE - 5,000 lbs. [2268 kg]
I-BASE - 1,300 lbs. [590 kg
TOTAL SYSTEM:
8530579 - 1,850 lbs. [839 kg]
8530595 - 5,550 lbs. [2517 kg]
THIS MAN-RATED SYSTEM IS DESIGNED FOR A MAXIMUM OF
1
PERSON
USER CAPACITY IN ACCORDANCE WITH MANUFACTURER'S
INSTRUCTIONS. FAILURE TO COMPLY MAY RESULT IN SERIOUS
INJURY OR DEATH.
THIS SYSTEM MEETS OR EXCEEDS ALL
APPLICABLE OSHA & ANSI STANDARDS.
TM
9509036 REV A
8530595, 8530606
PORTABLE COUNTERWEIGHTED JIB BASE SYSTEM WITH
CENTER MOUNTED SLEEVE
OPERATORS INSTRUCTIONS
WARNING
• DO NOT USE THIS SYSTEM UNLESS IT HAS BEEN FILLED WITH 4000 PSI CONCRETE.
• DO NOT FILL THE DAVIT SLEEVE WITH CONCRETE. PLUG HOLE WHILE FILLING BOX.
• ALL USERS MUST READ AND UNDERSTAND THE INSTRUCTIONS PRIOR TO USING THIS SYSTEM.
• DO NOT TRANSPORT AT SPEEDS GREATER THAN 5 MPH / 8 KPH.
• PLEASE SEE DAVIT WARNING LABEL TO DETERMINE SAFE NUMBER OF USERS.
• NO MORE THAN ONE PERSON IS ALLOWED TO BE ATTACHED TO A GLIDE RAIL TROLLEY OR ANCHOR POINT AT ANY GIVEN TIME.
• BE CAUTIOUS OF OVERHEAD POWER LINES OR OTHER ELECTRIC SOURCES WHICH CAN CAUSE ELECTRIC SHOCK.
• DO NOT USE THIS SYSTEM UNLESS THE SLOPE INDICATORS ARE INDICATING 2° OR LESS OF SLOPE. THE LEVELING JACKS (IF SUPPLIED)
SHOULD BE USED TO LEVEL THE SYSTEM WITHIN THE 2° REQUIREMENT.
• ENSURE EQUIPMENT USED TO TRANSPORT THIS SYSTEM HAS SUFFICENT CAPACITY.
• IF YOU HAVE ANY QUESTIONS OR CONCERNS ON THE USEAGE, CARE, OR SUITABILITY OF THIS EQUIPMENT, PLEASE CONTACT CAPITAL
SAFETY BEFORE USING IT.
• SUPPORTING STRUCTURES MUST BE CERTIFIED AND CAPABLE OF SUPPORTING THE ENTIRE WEIGHT OF THE CONFIGURED SYSTEM
ALONG WITH ANY LOADS THAT COULD POTENTIALLY BE INTRODUCED IN THE EVENT OF A FALL.
• WHEN TRANSPORTING THIS SYSTEM USING THE LIFTING EYES, ALWAYS LIFT FROM ALL FOUR POINTS EVENLY. DO NOT STAND BELOW
THE SYSTEM WHILE IT IS BEING LIFTED OR TRANSPORTED.
8530579, 8530607
APPROXIMATE WEIGHT
WARNING
1,850 LBS / 839 kg
8530595, 8530606
WARNING
APPROXIMATE WEIGHT
5000 lbs / 2,268 kg
All Models
LEVELING JACK
MOUNTS
(JACKS OPTIONAL)
TM
9509030 Rev. A
9512507 REV A
14
LIFTING EYES
PLACE 9504547
ID LABEL HERE
CONCRETE
DAVIT SLEEVE
FORK POCKETS
SLOPE INDICATORS
9512505 REV A