Dynaphos Starter SK-200 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Linterna Dynaphos Starter SK-200. Dynaphos Starter SK-200 8 páginas. Studio flash

Mounting the flash and preparing to work

screw 7.

pic. 1

Mount the flash on a light stand and fix it

(see p.

2). Adjust the horizontal angle and secure the handle

18. To take down the protective cap or mounted accessory, hold down the

front fit release button

it forward (pic.1). To mount an accessory, proceed the opposite way as

matching the feathers of the bayonet with the corresponding holes of the

flashe body (pic.2). If the modeling lamp isn't installed in advance, installe

it by using gloves or clean cloth (pic.3). Make sure that the power switch

is at position "0" and plug in the power cable into the power sock-

et 13. Set the power switch at position "I" to turn on the flash. To

work with photographic umbrella use the standard 15 cm reflec-

tor and place it with the umbrella outfit matching the flash umbrella

holder

(see the picture on the

pic. 2

turn the accessory counterclockwise and pull

left). Fix the umbrella through the fixing

Guide

pic. 3

through the screw