adeptus 56114 Manual de instrucciones de montaje - Página 12

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Mobiliario interior adeptus 56114. adeptus 56114 15 páginas.

SECURE THE UNIT TO THE WALL WITH THE ANTI-TIP KIT

1. INSERT THE ANCHOR INTO THE WALL

APPROXIMATELY 1189MM (46,8IN) FROM THE

FLOOR (ADJUST FOR CARPET OR RUG

THICKNESS IF APLICABLE).

2. FEED PART B THROUGH THE SMALLER

HOLE IN THE BRACKET AND SECURE INTO

THE WALL ANCHOR. THE OTHER END OF

THE BRACKET SHOULD BE UPWARD.

3. FEED PART E THROUGH THE SMALLER

HOLE IN THE OTHER BRACKET AND SECURE

THROUGH THE BACK PANEL AND INTO THE

CENTER OF THE TOP PANEL. THE OTHER

END OF THE BRACKET SHOULD BE UPWARD.

4. FEED THE STRAP THROUGH THE LARGER

HOLE IN THE WALL BRACKET FROM

UNDERNEATH. BRING THE STRAP OVER TO

THE UNIT BRACKET AND THROUGH THE

HOLE FROM ABOVE.

5. INSERT THE POINTED END OF THE STRAP

INTO THE CLASP END OF THE STRAP AND

TIGHTEN DOWN.

SEE THE ENLARGED DIAGRAMS TO ENSURE

PROPER INSTALLATION.

•

B = 01

E = 01

Screw (Drawer Runner

Screw

to Drawer side & anti-tip)

3.5x30mm

NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HERE IN ARE COPYRIGHTED.

K = 02

Anti-Tip Bracket

3.0x16mm

NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HEREIN ARE COPYRIGHTED.

Q = 01

M = 01

Anti-Tip Strap

Wall Anchor

•

12-15