AgSense AQUA-TRAC Lite Instrucciones de cableado - Página 15
Navegue en línea o descargue pdf Instrucciones de cableado para Instrumentos de medida AgSense AQUA-TRAC Lite. AgSense AQUA-TRAC Lite 20 páginas. 2015-18 soil moisture monitoring
Imprimir páginaWiring the Acclima TDR315L Sensor
to the Aqua Trac Unit
Find the group of terminals (3) with the group label SDI.
1. Connect the Blue wire from the Probe to the terminal marked SDI as shown above.
2. Connect the White wire from the Probe to the terminal marked GND as shown above.
3. Connect the Red wire from the Probe to the terminal marked PWR as shown above.
4. Make sure the Sensor Power jumper on the board is set to 12v.
5. If multiple sensors are used, they must be pre-addressed starting at address 0,1,2,3 (max
of 4 sensors)
Page 12