aireRyder F0049 Manual - Página 6

Navegue en línea o descargue pdf Manual para Ventilador aireRyder F0049. aireRyder F0049 8 páginas.

Imprimir página

Green (Ground)

Fig.9

Wood Member

(2" x 4" Approx.)

Ceiling

Flat Washer

Dry Wall Screw

Safety Cable

Attach the loop at the end of the safety cable

to the ceiling surface, then secure it with a flat

washer and dry wall screw. Make sure the flat

washer and dry wall screw are covered by the

fan canopy.

Plastic Insert

Blade Holder

Motor Screw

Secure blade holders to the motor with

motor screws and washers.

NOTE: Before installing blade

holders to the motor, please

remove the plastic inserts

Assembly without fan light

Make sure the lead wire of fan light

in switch box is sealed with a wire

connector exactly. Secure the switch

box cover with the switch box screws.

Make wires connections:

Measure the length of wire that you need.

1). The motor white wire to the white wire from the outlet box with a wire connector.

2). The motor black wire and blue wire to the black wire from the outlet box with

a wire connector.

3).

The ground wires from the downrod and the hanger bracket to the ground wire

from the outlet box with a wire connector.

*** After making the wire connections, the wires should be spread apart with the

Blue

grounded conductor and the equipment-grounding conductor on one side of the

outlet box and the ungrounded conductor on the other side of the outlet box.

*** After the splices have been made, they should be turned upward and pushed

carefully up into the outlet box.

Ceiling Joist

Junction Box

Hanger Bracket

Fig.10

Fig.13

Fig.14.

Attach the rubber clip to cover the slot.

Fig.16.

Switch Box

Screw

Fig.17

Turn ON the electric power at the

main fuse or circuit breaker box.

Fig.11

Canopy

Screw

Secure the canopy to hanger

bracket with screws.

Slot

Rubber Clip

PAGE: 6 / 8

Blade Holder

Fig.12

Tighten blades to blade holders by

using blade screws and washers.

Connect the two terminals respectively

from the motor and the switch box.

Reverse

Slide Switch

Forward

Fig.18

1).The fan switch can switch advances

to a new position whenever the switch

is pulled.The sequence of position is

OFF-HI-MED-LOW.

2).The slide switch sets direction of fan

rotation.Push the slide switch down

for" Forward" and up for "Reverse".

Blade Screw

Washer

Blade

Fig.15.

Switch Box

Fan Switch

171120