Maisi Smart Dashcam Manual de inicio rápido - Página 8

Navegue en línea o descargue pdf Manual de inicio rápido para Cámaras de salpicadero Maisi Smart Dashcam. Maisi Smart Dashcam 16 páginas.

This refers to the sound when you press the button (on the camera), or the

sound when the camera is powered up or shut down. You can turn them on or

off. When beep sound is turned on, you can adjust the volume as well.

Language

You can choose the language from English, French, Spanish, Portuguese,

German, Italian, Simplified Chinese, Traditional Chinese, Russian, or

Japanese, etc.

TV Mode

For playback purpose, you can use the AV Out port (on the camera) to

connect the camera with your TV via a HDMI cable. Depending on your

country, choose either NTSC (National Television System Committee) or PAL

(Phase Alternate Line). Press REC to save changes.

Frequency

Choose the correct frequency to avoid flickering. In United Kingdom, 50 Hz is

widely used. However, in the United States, 60Hz is more common.

Screen Saver

This is usually used when you do not want the camera to distract your driving.

The screen turns off but the recording continues. You can set the camera to

turn off the screen after 3 minutes, 5 minutes, or 10 minutes. You can also

choose to turn off this function as well, depending on your needs; in this case,

the camera screen will remain on throughout the journey.

Lamp Setting / IR LED

This refers to the night vision LED in front of the camera. You can set it to on

or off.

Note: if the camera is in recording mode

(or Picture Mode

, see

below), you can press

to turn on/off the LED.

Exposure

Changing the exposure value will make sure your pictures/videos are always

correctly exposed. The bigger the value, the greater amount of light passes

through the lens, and, the smaller the value, the less amount of light. You

may set the exposure compensation to a higher value (i.e. +2.0) at nights and

a lower value during daytime (i.e. -2.0) to achieve better performance.

Page 7