IKEA IH5303WS0 Instrucciones de instalación y manual de uso y mantenimiento - Página 9

Navegue en línea o descargue pdf Instrucciones de instalación y manual de uso y mantenimiento para Campana de ventilación IKEA IH5303WS0. IKEA IH5303WS0 28 páginas. 90 cm (35 2/5") wall-mount canopy range hood

f"ss cl B c ageHooc
Excessive Weight Hazard
Use two or more people to move and install
range hood.
Failure to do so can result in back or other injury.
1=
Using 2 or more people, hang range hood on 2 mounting
hooks through the rectangular cutouts on back of hood.
ID
i
I
A
'
E
M<:x <®E
Connec
on
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Disconnect
power.
2. Remove terminal box cover.
3. Remove the knockout in the terminal box cover and install the
UL-listed or CSA approved V2"strain relief.
4. Run 3 wires, black, white and green (14AWG) in W' conduit
from service panel to terminal box.
A
\
B
\
\
ii ¸ ¸y
B
A. Mounting hooks
B. Mounting screws
C. Leveling screws
D. Centerline on wall
aS
_
u
_C
s
E. Transition
F. 3.5 x 9.5 mm screws
G. Terminal box
2. Level the hood with leveling screws in mounting hooks or
rectangular cutouts, using a level across bottom of hood.
3. Secure hood with 4 screws through remaining 4 holes in
hood.
4. Install transition with 2 screws.
1=
_"_ ...........
" .... _ w_'_sy_
C,o/stt@c!
Fit vent system over transition piece.
A
.......
A. Vent system
B. Transition piece
2. Seal connection with clamps.
J
!
D
E
F
A. UL-listed or CSA
approved strain relief
B. 1/_,, c onduit
C. Terminal box
D. Black wires
E. Green (or bare) wire connected
to yellow-green
wire
F. White wires
5. Use UL listed wire connectors
and connect black wires
together.
6. Use UL listed wire connectors
and connect white wires
together.
7=
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminaJ box.
Failure to do so can result in death or electrical
shock.
Connect ground wire to green and yellow ground wire in
terminal box using UL listed wire connectors.