airforte Aero 750 BM Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Limpiador de aire airforte Aero 750 BM. airforte Aero 750 BM 15 páginas. Air cleaning unit

INTRODUCTION

The Aero 750 BM unit uses specially engineered nanotechnology filters which are combined

with ultraviolet light to disinfect and clean the air that travels through it. Also, active carbon

and ionization are used. The air is pushed through by means of a special low-noise fan.

WARNING:

Do not splash or pour water directly onto the unit. Water can cause an electric shock or can

damage the equipment. For service and cleaning always disconnect the unit from the mains

power supply.

NEVER REMOVE THE COVER WHEN THE UNIT IS WORKING.

NEVER LOOK DIRECTLY AT THE UV LIGHT.

Before installation

It is recommended that safety shoes and protective gloves are used during the installation

process. Other safety equipment might be necessary depending upon any localised

conditions. Personal protective equipment is not needed during the operation of the device.

Airforte International Ltd does not accept any liability for injuries caused during installation.

This device has been engineered and manufactured to ensure your personal safety; however

improper use may result in damage or injury.

CAUTION: The device must be installed at a height that will allow people to pass safely

underneath it without running the risk of striking it with their heads.

Only officially approved methods are allowed for installing the device. The minimum load

required is 20 kg per fixing point.

CAUTION: The installation method must be secured so that the Aero 750 BM unit cannot fall

off or come loose under any circumstances.

Unpacking and Checking

ATTENTION: Do not destroy or dispose of any of the packaging materials if the device is to be

transported in the future. Together with the transportation boxes they make an ideal

container in which to transport the device and its accessories.

Airforte Aero 750 BM User Manual