Airgineers Micro Drone Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Drones Airgineers Micro Drone. Airgineers Micro Drone 16 páginas.

Setting up the failsafe

STEP 1

STEP 3

Select FAILSAFE for Ch3, select ON.

NOTE: Ch3 controls the up/down (throttle) movement

of the left-hand control stick.

Make sure the left-hand control stick is all the way down.

Press SETUP (-100% shows on screen).

STEP 2

Turn on the

transmitter, by

pressing the two

ON/OFF buttons

located either

side of the screen.

Press the spanner/

screwdriver icon

on the screen, then

select FUNCTION.

Scroll down to the

bottom and select

Failsafe.

STEP 4

Select FAILSAFE for Ch1, by pressing OFF.

On the next screen select ON.

NOTE: Ch1 controls the left/right movement

of the right-hand control stick. You can test

this by moving the control stick left and right,

the movement should be indicated in the bar

across the bottom of the screen as the

stick moves.

Make sure that the stick is in the neutral (centre)

position and press SETUP. Then use the back

arrow to go back to the Failsafe -channel select

menu. You should now see that Ch1 is set to 0%.

Repeat the setup procedure for Ch2 and Ch4.

NOTE: Ch2 controls the forward/backward

movement on the right-hand control stick. Ch4

controls the left/right movement of the left-

hand control stick.

Use the back arrow to go back to the Failsafe channel select menu. You

should now see that Ch3 is set to -100% and Ch1, 2 and 4 are set to 0%.

Failsafe is now set up. Use the back arrow to return to the main menu.

IMPORTANT: Setting the Failsafe mode allows the drone to stop

flying and drop to the ground in the event of loss of transmission.

Airginners Manual version 1.0 2022