Airglas GLH3000 Nose Ski Instrucciones para el mantenimiento de la aeronavegabilidad - Página 13

Navegue en línea o descargue pdf Instrucciones para el mantenimiento de la aeronavegabilidad para Herramientas Airglas GLH3000 Nose Ski. Airglas GLH3000 Nose Ski 17 páginas. Ski kit for piper pa-18, pa-12, cc-18, s-18-180, sky international, inc. aviat a-1, a-1a, a-1b, a-1c-180, a-1c-200

Imprimir página
2. INSPECT – (Continued)
3. INSPECT – The main landing gear hardware and ski weldments for cracks, bends, and
4. INSPECT – The hydraulic cylinder. Inspect for damage, corrosion or leaking seals.
5. INSPECT – The Electric/Hydraulic pump for secure mounting, wiring condition, reservoir for
6. INSPECT – The ski tail wheel (LW2500-18) Tail Wheel Assembly for wear. Replace tire if
7.
INSPECT – The Ski Rigging angles to insure a minimum angle of +1.5°(+1/-0) tip up in the ski
position in flight. (It may be necessary to lift the aircraft to confirm this) No
adjustment is provided in cables. Contact
tolerance.
8. INSPECT – The doors for integrity, wear, and delamination.
9. INSPECT – The operation of the ski system. Confirm full deployment and retraction of both
Page Revision A
MANUAL REVISION B
THIS MANUAL INCLUDES INFORMATION PROPRIETARY TO
The (GLH3500-5) Yoke Assembly for bends, cracks, dents and corrosion. Grease
the pivots and insect for wear. Apply light penetrating oil to the Rod Ends and
insect for wear.
The (GLH3000-10) Axle Restraining Cable for security.
corrosion.
Replace components and/or seals as necessary.
contaminants or sediment, and leaks. Inspect internal and external hydraulic
lines for security, chafing, and leaks. Service with MIL-H-5606 Hydraulic Fluid.
more than 50% worn. Replace cartridge bearings if worn.
skis. Confirm operation and position locked indicator lights are functional and
accurate. (Allow adequate clearance for the aircraft while performing operational
checks)
Airglas, Inc.
ASSEMBLY WITHOUT THE PRIOR WRITTEN PERMISSION OF
Airglas, Inc.
Airglas, Inc.
27 July 2011
AND SHALL NOT BE USED TO MANUFACTURE OR REPRODUCE ANY PART OR
Airglas, Inc.
Manual # GLH3000-105
if ski position is not within
13 |
P a g e