Makita 6304LR Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Taladro Makita 6304LR. Makita 6304LR 17 páginas. Makita 6304lr drill: specifications
También para Makita 6304LR: Desglose de piezas (2 páginas)

Imprimir página

1. Chuck key

1. Stopper holder

2. Depth gauge

3. Side grip

4. Convex

5. Concave

1. Depth gauge

2. Side grip

Installing or removing drill bit

003056

To install the bit, place it in the chuck as far as it will go.

Tighten the chuck by hand. Place the chuck key in each of

the three holes and tighten clockwise. Be sure to tighten all

three chuck holes evenly.

To remove the bit, turn the chuck key counterclockwise in just

one hole, then loosen the chuck by hand.

After using the chuck key, be sure to return to the original

position.

Depth gauge (optional accessory)

003060

The depth gauge is convenient for drilling holes of uniform

depth.

Loosen the side grip and remove it. Fit the convex on the

stopper holder to the concave on the tool barrel. Insert the

side grip into the stopper holder and screw the side grip.

Insert the depth gauge into the hole in the stopper holder.

003061

Adjust the depth gauge to the desired depth and tighten the

side grip firmly.