Aliyiqi AQTH Manual de inicio rápido - Página 3

Navegue en línea o descargue pdf Manual de inicio rápido para Herramientas Aliyiqi AQTH. Aliyiqi AQTH 4 páginas. Preset torque driver

3.1 Operation and instructions in use

3.1.1 Select the appropriate torque driver according to the torque range required

when the fastener is tightened.

3.1.2 Set the torque value of the torque driver according to the torque required

for tightening the fastener; turn the locking wheel in the opposite direction of

\"LOCK\" to unlock (the scale lines of the main scale and auxiliary scale must be

as shown in Figure 1 Only when the display is aligned, can it be turned and

unlocked in the opposite direction of \"LOCK\". Loosen the adjustment ring, and

adjust the position of the adjustment ring by hand or the attached hook wrench.

The working torque value is the main scale indication + subscale indication . As

shown in Figure 1, the torque value is: 2 + 0.1 = 2.1kg.cm. After completing the

setting, turn the locking wheel to lock in the direction marked with \"\" LOCK \"\"

(the scale lines of the main scale and sub-scale must be aligned as shown in

Figure 1 before turning and locking in the direction of \"LOCK\") .

3.1.3 According to the form of the head of the fastener (cross, straight, plum,

etc.), select the appropriate bit from the attachment and insert it into the

hexagonal joint of the head of the torque driver.

3.1.4 Hold the handle and align the bit with the fastener, and turn the torque

screwdriver until the tightening torque of the fastener reaches the set value. The

torque screwdriver forwards the sound signal empty, accompanied by obvious

hand vibration, prompting to complete the operation .

Four, maintenance and warranty

4.1 Confirm the torque range of the torque screwdriver before use, do not use it

beyond the range.

4.2 Do not disassemble or modify the torque driver yourself.

4.3 Please use the tool normally, do not drop, press or replace it as other tools.

4.4 Do not engage in underwater operations or contact with water.

4.5 When this tool forwards voice signals empty, please stop tightening the

fasteners.

4.6 Please store the tool in a clean place and keep it properly.