alkitronic CLD 780 Manual de funcionamiento y mantenimiento - Página 5

Navegue en línea o descargue pdf Manual de funcionamiento y mantenimiento para Herramientas alkitronic CLD 780. alkitronic CLD 780 12 páginas. Compact torque multiplier

Imprimir página

Safety instructions

1.1

Obligations of the operator

The user is obliged to read these operating and maintenance

instructions before carrying out any operation or service. al-

kitronic® torque multiplier operations may only be performed

by persons who are familiar with the purpose, consequences

and exact execution.

The user must not be impaired in any way, such as through

drugs, alcohol and medication.

1.2

Intended use

alkitronic® torque multiplier are suitable for continuously ro-

tating tightening and loosening of heavy screw connections.

Any other use, e.g. as a stirring or drilling machine, can cause

damage to the device and the operator. The torque multipli-

ers must not be subjected to external mechanical forces that

could lead to deformation. Other types of use not listed here

require the approval of alki TECHNIK GmbH.

If you have questions about safety measures and areas of ap-

plication, your alkitronic® Partner will be happy to help you.

Incorrect operation, improper use, operation by

unqualified personnel can cause serious personal

injury and property damage.

The user is responsible to third parties in the work

area.

Operation

Depending on the work environment and field of application

for the alkitronic® torque multiplier, local regulations for the

wearing of body protection (eg safety shoes, helmet, etc.)

may apply.

Failure to comply with such regulations can result

in serious bodily injury (e.g. crushing, head inju-

ries from flying metal parts). When operating the

alkitronic® torque multiplier wearing of hearing

protection is mandatory. In continuous operation,

the handle housing cools down greatly. Wearing

gloves is therefore recommended.

2.1

Commissioning

Depending on the field of applciation, standard nuts / con-

nectors, special torque transducers or adapters are required

for tightening and loosening screw connections (available as

accessories). The standard nuts / connectors are attached to

the output square and secured. Exchange see also Service,

section 3.1.

Before the compressed air is connected, the multiplier must

be prepared for the process:

Pneumatic Torque Multiplier

•

Conducting a security check for correct fit of the adapter

Check for possible damages of the DMAs or adapter

In case of damage, replace immediately - do not continue

working. Only use original alkitronic® accessories or spare

parts!

2.2

Preparing for use

alkitronic® DMA

Torque reaction absorber

• Place the alkitronic® CL multiplier on a flat surface

• Put support foot / DMA (1) on the gearing (4)

• Fix the standard nut / connector (2) / (3) to the square

shaft (5)

• Insert locking pin (7), secure with rubber ring (6)

or screw in the locking screw (8)

alkitronic®

STACO

Standard

nut

alkitronic® STACO

Standard nut

alkitronic® STABI

Standard connector