Brother P-TOUCH CUBE Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Etiquetadora Brother P-TOUCH CUBE. Brother P-TOUCH CUBE 18 páginas. Tze tape
También para Brother P-TOUCH CUBE: Manual del usuario (18 páginas), Manual del usuario (25 páginas), Manual del usuario (18 páginas), Manual del usuario (18 páginas)

Imprimir página

3. Inserting the Tape Cassette

Make sure your Tape Cassettes display the TZe mark (

Use only tape widths of 3.5 mm, 6 mm, 9 mm, or 12 mm.

If there is a stopper on the TZe Tape Cassette, remove it before installation.

1. Hold the label printer as shown in the

illustration. Open the Cassette Cover

by pressing the mark on its side (1) and

pulling in the direction of the arrow (2).

2. Insert the Tape Cassette following the

drawing marked inside the case.

Confirm that the tip of the tape is

pointed at the Tape Exit Slot.

3. Press the Tape Cassette into the label

printer until it snaps into place.

NOTE

• After the tape passes under the Tape

Guide, pull the tip to remove any slack

in the tape.

• Make sure the tape is not caught in

the unit when inserting or removing

the Tape Cassette.

4. Insert the two hooks at the rear of the

Cassette Cover into the slots on the

label printer (3). Push the Cassette

Cover closed (4), making sure it locks

into place.

End of Tape

Tape Guide

Cassette Cover

Print Head