AEG L 75470 FL Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Lavadora AEG L 75470 FL. AEG L 75470 FL 36 páginas.
También para AEG L 75470 FL: Manual del usuario (36 páginas), Manual del usuario (32 páginas), Manual del usuario (36 páginas), Manual del usuario (36 páginas)

Imprimir página
AEG L 75470 FL Manual del usuario
D
• The programme time
When the programme starts, the time decreases with steps of 1 minute.
• The delay start
When you press the delay start button, the display shows the delay start
time.
• Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Troubleshooting' chapter.
• Err
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
•
When the programme is completed.
1) Only available for Spin/Drain programme.
2) The symbols appear on the display when the related phase or function is set.
START/PAUSE BUTTON
Press button
4
to start or interrupt a
programme.

DELAY START BUTTON

Press button
5
to delay the start of a
programme from 30 minutes to 20 hours.
TIME SAVE BUTTON
Press the button
6
gramme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.

EXTRA RINSE BUTTON

Press button
7
to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
4
5
6
to decrease the pro-
7
4
flashes.
STAIN BUTTON
Press button
8
to add the stain phase to
a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.
Spin phase is off.
'Rinse Hold' function is
on.
ENGLISH
9
8
.
9