Fujitsu ScanSnap S300 Manual de introducción - Página 34
Navegue en línea o descargue pdf Manual de introducción para Escáner Fujitsu ScanSnap S300. Fujitsu ScanSnap S300 37 páginas. Color image scanner
También para Fujitsu ScanSnap S300: Procedimientos de instalación (3 páginas), Especificación (2 páginas), Instrucciones de limpieza (2 páginas)
Imprimir página
5.3 Cleaning Inside of the Scanner
Clean inside of the scanner with a cloth moistened with Cleaner F1.
In an alternating succession of scanning documents, the accumulated paper-powder and
dust inside the scanner causes a scanning error.
As a guideline, clean the ADF every 200 sheets of documents. Note that this guideline
varies according to the type of documents you are scanning. For example, the ADF must
be cleaned more frequently when scanning documents on that the toner has not been
sufficiently fixed on.
Clean the ADF according to the following procedure referring to the illustrations.
ATTENTION
1.
Open the ADF while pulling the Cover open lever.
Cover open lever
2.
Clean the following locations with a cloth moistened with Cleaner F1.
33
• Never use water or neutral detergent to clean the inside of the scanner.
• Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt
and dust to enter the scanner, resulting in the scanner failure, malfunction
and image error.
ADF
Cloth
Cleaner F1 or
neutral detergent
Paint thinner