Brother HL-4040CDN - Color Laser Printer Manual de configuración rápida - Página 29

Navegue en línea o descargue pdf Manual de configuración rápida para Servidor de impresión Brother HL-4040CDN - Color Laser Printer. Brother HL-4040CDN - Color Laser Printer 35 páginas. Print unable 2a or no waste toner error
También para Brother HL-4040CDN - Color Laser Printer: Folleto (4 páginas), Lista de referencia de piezas (40 páginas), Manual de actualización del servicio (11 páginas), Limpieza y cuidado (7 páginas)

Imprimir página

Brother HL-4040CDN - Color Laser Printer Manual de configuración rápida

BRAdmin Light utility (For Windows

The BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also search for Brother

products on your network, view the status and configure basic network settings, such as IP address.

For more information on BRAdmin Light, visit us at http://solutions.brother.com.

Note

• If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version

that is available as a download from http://solutions.brother.com.

• If you are using Personal Firewall software (e.g. Windows Firewall), disable it. Once you are sure that you can

print, re-start your Personal Firewall software.

Installing the BRAdmin Light

configuration utility

Note

The default password for the print server is

'access'. You can use BRAdmin Light to change

this password.

Click Install Other Drivers or Utilities on the

menu screen.

Click BRAdmin Light and follow the on-screen

instructions.

Note

For Windows Vista™, when the User Account

Control screen appears, click Allow.

For Network Users

users)

Setting your IP address, Subnet

Mask and Gateway using BRAdmin

Light

Note

If you have a DHCP/BOOTP/RARP server in your

network, you don't have to do the following

operation. Because the print server will

automatically obtain its IP address.

Start BRAdmin Light. It will search for new

devices automatically.

Double-click the unconfigured device.

Choose Static for the Boot Method. Enter the

IP Address, Subnet Mask and Gateway, and

then click OK.

The address information will be saved to the

printer.