Brother HL-4040CN Manual de configuración rápida - Página 8

Navegue en línea o descargue pdf Manual de configuración rápida para Servidor de impresión Brother HL-4040CN. Brother HL-4040CN 35 páginas. Brother printer - laser printer user manual
También para Brother HL-4040CN: Folleto (4 páginas), Folleto y especificaciones (2 páginas), Lista de referencia de piezas (40 páginas), Manual de actualización del servicio (11 páginas), Limpieza y cuidado (7 páginas), Manual de servicio (13 páginas), Instrucciones técnicas (6 páginas), (danés) Manual del usuario (35 páginas)

Imprimir página
Brother HL-4040CN Manual de configuración rápida
Safety Precautions
Internal laser radiation
Maximum radiation power:
Wave length:
Laser class:
IMPORTANT - For Your Safety
To ensure safe operation, the supplied three-pin plug
must be inserted only into a standard three-pin power
outlet that is properly grounded through the normal
household wiring.
Extension cords used with this printer must be three-
pin plug type and correctly wired to provide proper
grounding. Incorrectly wired extension cords may
cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily
does not imply that the power is grounded and that
the installation is completely safe. For your safety, if
in any doubt about the effective grounding of the
power, call a qualified electrician.
This product should be connected to an AC power
source within the range indicated on the rating label.
DO NOT connect it to a DC power source. If you are
not sure, contact a qualified electrician.
Maschinenlärminformations- Verordnung 3.
GPSGV (For Germany only)
Der höchste Schalldruckpegel beträgt 70 dB(A) oder
weniger gemäß EN ISO 7779.
Disconnect device
You must install this printer near a power outlet that is
easily accessible. In case of an emergency, you must
disconnect the power cord from the power outlet to
shut off the power completely.
Caution for LAN connection
Connect this product to a LAN connection that is not
subjected to over voltages.
IT power system (For Norway only)
This product is also designed for an IT power system
with phase-to-phase voltage 230V.
Wiring information (for UK)
Important
If you need to replace the plug fuse, fit a fuse that is
approved by ASTA to BS1362 with the same rating as
the original fuse.
Always replace the fuse cover. Never use a plug that
does not have a cover.
Warning - This printer must be earthed.
The wires in the mains lead are coloured in line with
the following code:
Green and Yellow: Earth
Blue:
Brown:
If in any doubt, call a qualified electrician.
6
25 mW
780 - 800 nm
Class 3B
Neutral
Live