Fujitsu ETERNUS DX Disk Manual de configuración - Página 17

Navegue en línea o descargue pdf Manual de configuración para Almacenamiento Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 25 páginas. Server connection, fcoe for linux driver settings for converged network adapter cards
También para Fujitsu ETERNUS DX Disk: Manual del usuario (35 páginas), Manual del usuario (42 páginas), Manual de configuración (28 páginas), Manual de configuración (44 páginas), Manual de configuración (28 páginas), Manual de configuración (29 páginas), Manual de configuración (32 páginas), Manual de configuración (35 páginas), Manual de configuración (31 páginas), Manual de configuración (43 páginas), Manual de configuración (21 páginas), Manual de configuración (24 páginas)

Chapter 8

Setting Up Oracle VM Server

8.1

Setting Up the Fibre Channel Cards

Since the standard driver that is supplied with the OS is used for the Fibre Channel driver, other drivers do

not need to be installed.

Use the procedure below to set the BIOS settings and the drive parameters for Fibre Channel cards.

Turn the server on, and watch for the following message to be displayed, in order to confirm that the

BIOS version specified in "Server Support Matrix" is installed.

QLogic Corporation

QLAxxxx PCI Fibre Channel ROM BIOS Version 1.50

www.qlogic.com

Press <CTRL-Q> for Fast!UTIL

If the BIOS version matches that specified in "Server Support Matrix", press the [Ctrl]+[Q] keys while the

above message is displayed.

If the BIOS version differs from that specified in "Server Support Matrix", download and install the BIOS

version specified in "Server Support Matrix" from the QLogic Corp. web-site.

When two or more Fibre Channel cards are installed, the [Select Host Adapter] window appears. Se-

lect the Fibre Channel card to be set in the window.

Select [Configuration Settings] from the [Fast!UTIL Options] menu and press the [Enter] key.

The [Configuration Settings] menu appears.

Select the [Host Adapter Settings] item.

Check the values that are set in the [Host Adapter Settings] or [Adapter Settings] window.

The setting values vary depending on the type of Fibre Channel card used. Refer to the following table.

If the displayed values are different from those given in the following table, adjust them.

Refer to the Fibre Channel card manual and/or QLogic Corp. web-site for details.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86

Configuration Settings

Host Adapter Settings

Selectable Boot Settings

Restore Default Settings

Raw Nvram Data

Advanced Adapter Settings

Extended Firmware Settings

P3AM-6612-14ENZ0