AEG PowerCare LR86CB86 Manual del usuario - Página 25

Navegue en línea o descargue pdf Manual del usuario para Lavadora AEG PowerCare LR86CB86. AEG PowerCare LR86CB86 48 páginas.

Imprimir página

11.1 Activating the appliance

1. Connect the mains plug to the mains

socket.

2. Open the water tap.

3. Press the On/Off button for a few

seconds to activate the appliance.

A short tune sounds. The appliance

automatically proposes a default

programme. The relevant indicator

illuminates.

The display shows the cycle duration, the

maximum load (for a few seconds), the

default temperature, the default spin

speed and the indicators of the phases

making up the programme.

11.2 Loading the laundry

1. Open the appliance door.

2. Shake the items before you put them

in the appliance.

3. Put the laundry in the drum, one item

at a time.

Make sure not to put too much laundry in

the drum.

4. Close the door firmly.

CAUTION!

Make sure that no laundry

stays between the seal and

the door. There is a risk of

water leakage or damage to

the laundry.

CAUTION!

Washing heavily oiled,

greasy stains could cause

damage rubber parts of the

washing machine.

11.3 Filling the detergent and

additives

Compartment for prewash phase,

soak programme or stain remover.

Compartment for washing phase.

Compartment for liquid additives

(fabric conditioner, starch).

Maximum level for quantity of liquid

additives.

Flap for powder or liquid detergent.

Always follow the

instructions that you find on

the packaging of the

detergent products, but we

recommend that you do not

exceed the maximum

indicated level (

quantity will however

guarantee the best washing

results.

After a washing cycle, if

necessary, remove any

detergent residue from the

detergent dispenser.

11.4 Check the position of the

flap

1. Pull out the detergent dispenser until

it stops.

2. Press the lever down to remove the

dispenser.

ENGLISH

). This