AEG NSC7G181DS Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Frigorífico AEG NSC7G181DS. AEG NSC7G181DS 28 páginas.
Imprimir página
10
www.aeg.com
Fan button / indicator
12
ECO button
13
4.1 Switching on
Connect the mains plug to the power
socket.
To select a different set temperature,
refer to "Temperature regulation".
If
to "Troubleshooting".
4.2 Switching off
1. Press and hold the freezer
temperature button for 5 seconds.
The display shows blinking
2. Once the appliance is switched off,
the display reads
3. Disconnect the mains plug from the
power socket.
4.3 Temperature regulation
The temperature range may vary
between -15°C and -24°C for freezer and
between 2°C and 8°C for fridge.
Press the temperature buttons to set the
temperature of the appliance.
The recommended set temperature is:
• +4°C for the fridge
• -18°C for the freezer
You may set the recommended
temperature manually with temperature
buttons or by switching on the ECO
function. Refer to "ECO function" for
more information
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure, the
appliance goes back to the
set temperature.
4.4 Switching off the fridge
It is possible to switch off only the fridge
compartment leaving the freezer
compartment on.
appears on the display, refer
.
.
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
2. Once the fridge compartment is
switched off, the display reads
4.5 Switching on the fridge
To switch on the fridge:
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
2. The fridge compartment is switched
on and the previous set temperature
is restored.
To adjust the temperature,
refer to "Temperature
regulation".
4.6 ECO function
The ECO function sets the optimal
temperature to ensure food preservation
while minimizing energy consumption.
1. To activate the function press the
ECO button.
The fridge temperature is set to +4°C
and the freezer temperature to -18°C.
2. To deactivate the function, press the
ECO button again or select a
different set temperature (refer to
"Temperature regulation").
After deactivating the ECO function, the
fridge temperature is set to +2°C and the
freezer temperature to -20°C.
It is not possible to activate
the ECO function when the
Extra Cool function is on.
The ECOMETER indicator
shows the appliance's
current energy consumption.
Three fully lit bars indicate
the most energy-efficient
setup.
4.7 Extra Cool function
With the Extra Cool function, you may
rapidly cool large amounts of warm food,
for example after doing grocery
shopping, without warming food already
stored in the fridge compartment.
.
.
.