Brother MFC 3360C - Color Inkjet - All-in-One Manual de configuración rápida - Página 11
Navegue en línea o descargue pdf Manual de configuración rápida para Software Brother MFC 3360C - Color Inkjet - All-in-One. Brother MFC 3360C - Color Inkjet - All-in-One 24 páginas. Windows vista
También para Brother MFC 3360C - Color Inkjet - All-in-One: Manual de instalación (23 páginas), Manual de configuración rápida (23 páginas)
Imprimir página
7
Print quality check
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
q
Press Start
2
Make sure paper is loaded in the paper tray.
Press Color Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3
Check the quality of the four color blocks on the
sheet.
(black/ yellow/ cyan/ magenta)
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
q
1.Yes 2.No
5
Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 6.
OK
6
7
8
8
1
2
3
Poor
Setting Up the Machine
The LCD asks you if the print quality is OK for
black and color. Press 1 (Yes) or 2 (No) on the
dial pad.
Black OK?
q
1.Yes 2.No
Color OK?
q
1.Yes 2.No
After pressing 1 (Yes) or 2 (No) for both black
and color, the LCD shows:
Start Cleaning?
q
1.Yes 2.No
Press 1 (Yes), the machine will then start
cleaning the colors.
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
Choosing your language
(Canada only)
Press Menu, 0, 0.
Press a or b to choose your language
(English or French), and then press OK.
Language:English
Press Stop/Exit.
9