Brother MFC-790CW Manual de configuración rápida - Página 22
Navegue en línea o descargue pdf Manual de configuración rápida para Software Brother MFC-790CW. Brother MFC-790CW 44 páginas. Quick setup guide - spanish
También para Brother MFC-790CW: (Spanish) Guía De Configuración Rápida (50 páginas)
Imprimir página
Wired Network
e
When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes if you agree to the Software License
Agreement.
f
Choose Wired Network Connection, and
then click Next.
g
®
For Windows
when this screen appears, choose Change the
Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.
If you are using a firewall other than Windows
Firewall or Windows
may appear.
See the instructions provided with your firewall
software for information on how to add the
following network ports.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP port 137.
22
®
XP SP2/Windows Vista
users,
®
Firewall is off, this screen
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows APIPA in the IP
Address field, click Configure IP Address
and enter an IP address for your machine that
is suitable for your network.
• If the machine is not yet configured for use on
your network, the following screen appears.
Click OK.
The Configure IP Address window will
appear. Enter an IP address for your machine
that is suitable for your network by following the
on-screen instructions.
h
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
Important
®
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
®
Windows