Indesit IDL 535 Manual de instalación y uso - Página 7
Navegue en línea o descargue pdf Manual de instalación y uso para Lavavajillas Indesit IDL 535. Indesit IDL 535 17 páginas. Indesit dishwasher installation and use manual
También para Indesit IDL 535: Manual de instalación y uso (17 páginas), Manual de instalación y uso (16 páginas), Manual (17 páginas)
Imprimir página
Loading the Dishwasher
Load examples
Before placing the dishes in the dishwasher, remove the
larger food particles to prevent the filter from becoming
Top Rack
Bottom Rack
clogged, which results in reduced performance.
If the pots and pans have baked-on food that is extremely
hard to remove, we recommend that they be allowed to
soak before they are washed. This will eliminate the need
for extra wash cycles.
Pull out the racks to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the most difficult to clean
items on the bottom rack: pots, pans, lids, serving dishes
and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the
sides of the racks in order to avoid blocking the rotation
of the top spray arm.
- Pots, serving bowls, etc. must always be placed top
down.
- Deep pots should be slanted to allow the water to flow
out.
This basket is equipped with two removable grids: insert
the cutlery one by one into the slots; (fIg. A) Knives and
other utensils with sharp edges must be placed in the
cutlery basket with the points facing downwards, or they
must be positioned horizontally in the tip-up compartments
on the upper rack.
- Especially long utensils should be placed in the horizon-
A
tal position at the front of the upper rack.
How to Use the Upper Rack
The upper rack is designed to hold more delicate and
lighter dishware, such as glasses, coffee and tea cups
and saucers, as well as plates, small bowls and shallow
Fig. A
pans (as long as they are not too dirty).
B
- Position the dishes and cookware so that they do not
get moved by the spray of water.
How to adjust the Upper rack ...
1
2
The top rack can be adjusted using the two rack heights
(top and bottom). To adjust the rack, open up the tabs
that lock the guides and pull out the rack. Arrange the
rack with the back wheels in either the top or bottom
position and then insert it along the guides until the front
3
wheels are on as well. Close the tabs to lock the rack in
F
4
place (see Fig. F).
A
EN
5