Indesit FM 70 P.1 MR Manual de instrucciones de instalación y uso - Página 7

Navegue en línea o descargue pdf Manual de instrucciones de instalación y uso para Horno Indesit FM 70 P.1 MR. Indesit FM 70 P.1 MR 13 páginas. Indesit built-in oven instruction manual

Imprimir página

1. Front View

Programmer knob

to display a symbol,

turn the knob

to select a symbol,

press the knob

to set the various display,

setting the clock and timer,

total cooking time and

end time

Turn the knob

The "24 hour" electronic programmer enables the user to

set the duration and end time of a cooking operation for

any time within the upcoming 24 hours.

You can check the end time

and the timer

simply by turning the programmer knob

to select the corresponding symbol.

• Setting the clock:

When the appliance is turned on for the first time or after

a power cutoff, the clock display and the

light are flashing. Turn the programmer knob until the

desired time is shown. After 3 seconds, the time is vali-

dated.

To modify the time, the oven must be in manual mode

(no indicator lights on). Press and hold the programmer

knob until the

indicator light starts flashing. Then

turn the knob to display the desired time.

1 - Immediate start

The oven starts heating immediately and stops automati-

cally at the end of the programmed time.

- Display the cooking time:

Turn the programmer knob to select the

Press the knob.

flashes. Turn the knob to display the

desired cooking time. After 3 seconds, your choice is vali-

dated.

remains on at half power.

(Ignore the flashing of the

- Set the Function Selector to the desired position

- If desired, change the temperature using the Temperature

Selector.

• To cancel the cooking time, select the

and turn the programmer knob to display 0.00.

• When the time is up, an audio signal sounds. To turn off the

signal, press the knob and set the Function Selector back to

"0".

The programmer

Clock :

The time of day is always shown

also used to temporarily show the

end of time of an operation

for increasing

numbers

for decreasing

numbers

, the cooking time

indicator

Programmed cooking

indicator light.

light.)

function. Press

Symbol

is used to set the

end time for a cooking

or pyrolysis operation

Symbol

is used to set the total

cooking or pyrolysis

time (duration)

Symbol

is used for operating

is used to set the clock

the audio timer

• Audio timer:

To use the audio signal timer built into your oven, display

the

(hourglass) symbol by turning and pressing the

programmer knob. Then turn until the desired time is dis-

played. As soon as you release the knob, the timer will

start to count down. When the time is up, an audio signal

sounds. Press the knob to turn off the signal. The timer

operates independently from the oven.

Cooking without the Programmer (manual mode)

When no symbol is lit, the oven is in manual mode.

- Use the Function Selector to choose the desired cook-

ing method. A preselected temperature appears. You

can change it using the Temperature Selector.

The

indicator light flashes slowly while the

temperature in the oven is rising. It stays on when the

temperature reaches the specified level.

When the cooking is done, remember to turn off the oven

by setting the Function Selector back to "0".

2 - Delayed start

The programmer automatically starts the oven at the

programmed time.

- Make sure that the clock is set to the right time

- To display the cooking time:

Select the

indicator light, then press the knob.

Turn the knob to select the desired cooking time, such as 1:30

for example.

The

indicator light flashes. Turn the knob to select the end

time for the cooking operation (12:30, for example). Your choice

is validated after 3 seconds.

The two indicator lights

- Set the Function Selector to the desired position.

- If desired, change the temperature using the Temperature

Selector.

At 11:00, the cooking starts.

- To change the end time, proceed as follows:

Select the

indicator light. Press the knob.

Select the desired end time (for example, 12:30). After 3 sec-

onds, the time of day reappears.

• When the time is up, an audio signal sounds. To turn off the

signal, press the knob and set the Function Selector back to "0".

flashes.

and

remain on at half power.

flashes.