Kohler 1.1785.005 Manual de instalación - Página 28

Navegue en línea o descargue pdf Manual de instalación para Sanitarios Kohler 1.1785.005. Kohler 1.1785.005 41 páginas. Thermostatic electric shower

Post Installation Procedure (Continued)

Turn on the electrical

supply.

Start the shower to test for water flow.

The shower will beep once (3 times

when set in BEAB mode) and the white

start/stop light and orange status light

(green in BEAB Mode) will pulse. Wait

until the lights go solid and the shower

will beep again.

Push Start/Stop to turn off appliance.

Pulsing start/stop light and "beep"

indicates that appliance is shutting down.

This completes the installation of the Mira Advance shower. Please advise the

user how to operate their new shower and leave them with user instruction

guide.

1306246-W2-D

Turn on the power to appliance,

check Start/Stop for white light.

Note! The shower will beep 3

times if set to BEAB mode

Turn the temperature

control to number 8.

Turn the temperature control to the full

hot position and continue to run the

shower for at least 1 minute.

Appliance will purge water from heater

tank for a few seconds.

Important! DO NOT isolate power until

water has stopped.