AEG TR838A4OBC Manual del usuario - Página 26
Navegue en línea o descargue pdf Manual del usuario para Secadora AEG TR838A4OBC. AEG TR838A4OBC 40 páginas.
Imprimir página
26
www.aeg.com
1. Switch the appliance on by pressing
the On/Off button.
2. Press and hold the Tiempo/Tempo
sec. and Nivel de Sec. buttons for
some seconds.
3. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. if the operating
time is 1276 hours, the display shows
the text Hr for 2 seconds then 12 for
2 seconds followed by 76. This value
is displayed with a sequence of two
digits at a time: the first two digits
indicate thousands and hundreds,
the second two digits indicate tens
and units.
To exit this mode, either press any
button, turn the selector knob or switch
the appliance off.
10.5 Factory Defaults
This function allows to restore the factory
default settings. The saved options and
11. CARE AND CLEANING
11.1 Cleaning the filter
At the end of each cycle the
symbol comes on the display and you
must clean the filter.
The filter collects the lint
during the drying cycle.
To achieve the best drying
performances clean the filter
regularly , clogged filter lead
to longer cycles and energy
consumption increase.
Use your hand to clean the
filter , and if necessary , a
vacuum cleaner .
CAUTION!
Avoid the use of water to
clean the filter. Instead throw
away lint in the dustbin
( avoid dispersion of plastic
fiber in water ambient).
working modes will be reset. It will also
remove WiFi network credentials from
the appliance memory and reset
personalized program settings.
To activate this option follow steps
below:
1. Switch the appliance on by pressing
On/Off button.
2. Wait approximately 8 seconds.
3. Press and hold the Silencioso and
Anti-arrugas/Rugas buttons for
some seconds.
4. The appliance will acknowledge the
operation by displaying
1. Open the door. Pull the filter up.
filtro
2. Push the hook to open the filter.
3. Gather lint with hand from both
internal parts of the filter.
If the procedure does not
work (this could be due to
timeout or wrong keys
combination), switch the
appliance off and repeat the
sequence from the
beginning.
.