AEG TR959M6OBC Manual del usuario - Página 29

Navegue en línea o descargue pdf Manual del usuario para Secadora AEG TR959M6OBC. AEG TR959M6OBC 36 páginas.

Imprimir página

12. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

12.1 Error Codes

The appliance does not start or it stops during operation.

First try to find a solution to the problem (refer to the table). If the problem persists,

contact the Authorised Service Centre.

WARNING!

Deactivate the appliance before carrying out any check.

In case of major problems, the acoustic signals operate, the display shows an

error code and the Inicio/Pausa button may flash continuously:

Error code

E50

E90 or E91

EH0

If the display shows other error codes, deactivate and activate the appliance. If the

problem continues, contact the Authorised Service Centre.

In case of different problem with the tumble dryer check the table below for possible

solutions.

Possible cause

Appliance motor overloaded.

Too much laundry or entrap in the

drum.

Internal fail. No communication be‐

tween electronic elements of the

appliance.

The mains supply is unstable.

Remedy

The programme was not comple‐

ted. Remove the laundry from the

drum, set the programme and re‐

start the cycle.

The programme was not finished

properly or the appliance stoped

too early. Switch the appliance off

and on again.

If the error code appears again,

contact the Authorised Service

Centre.

When the appliance is showing

EH0, please wait until main supply

is stable than press start. If the ap‐

pliance pause the cycle without

any indication then press the cycle

start. If the warning will occur

check the power cord / socket in‐

tegrity or main supply.

ENGLISH