Kohler K-1112P Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Bañeras Kohler K-1112P. Kohler K-1112P 48 páginas. Bath with airjets and integral apron canada
También para Kohler K-1112P: Manual de instalación (48 páginas)
Imprimir página
Product Information (cont.)
Product Notices
NOTICE: Keep the area around the blower motor clean and free of debris. Ensure that the area around the
blower motor is free of sawdust, insulation, dirt, or other small loose debris. Such material could clog the
blower motor air ducts and reduce the air flow through the blower.
Factory-Assembled Features
Factory installed components include blower motor with power supply cord, check valve, air piping, user
keypad, and keypad cable. Other than power wiring and plumbing, no assembly is needed.
Connections and Service Access
NOTICE: Provide unrestricted service access to the blower motor and check valve. The access must be
located immediately next to the blower motor. Study the roughing-in information packed with the bath.
Before installation, ensure that there is proper access to the blower motor and final connections. If the blower
motor is installed in an enclosed area, an access panel is required at the blower motor. This panel should be
18" (45.7 cm) wide and 14" (35.6 cm) high minimum.
Kohler Co.
3
1034593-2-F